Julie PRO - Version 119 is here!

Julie Emulator - Version 119 is live!

See what's new in the latest version of your favourite Emulator

We're constantly making Julie even better! Our Development Team has been hard at work to bring you new solutions. We want to make sure that when you use Julie, no car that arrives at your workshop will surprise you!

Here's what's new in version 119 of Julie Emulator:

Version 119

Ford
 

1) New Program - FORD CAN 3
Use: Original car's ECU (donor) must be equipped with ABS ID + immo module located in BCU
(Can only be used for a project, e.g. installing the engine in a boat etc.)

Donor cars:
Ford Galaxy 2007-2016, Ford Mondeo 2007-2016, Ford S-Max 2007-2016

Available in:
Julie PRO, Julie LITE, Julie FORD

2) New Program - FORD CAN 2
Use: Original car's ECU (donor) must be equipped with immo module located in BCU
(Can only be used for a project, e.g. installing the engine in a boat etc.)

Supported ECU:
Visteon DCU-101

Donor car:
Ford Transit

Available in:
Julie PRO, Julie LITE, Julie FORD

Details:
Visteon DCU-101

3) New Program - FORD CAN 1
Use: Ford cars with immo module located inside the dashboard:

Supported ECUs:
Siemens VDO SID803/803A, Siemens SID206, Siemens SID202

Available in:
Julie PRO, Julie LITE, Julie FORD

Attention:
The following requirements must be met:
- The car must be equipped with a mechanical key
OR
- You are changing only the ECU

Details:
Siemens SID803/803A

ECU Numbers:
5WS40557A-T | 6M51-12A550-AEA (Ford Focus 2.0 TDCi 136HP 2007)

Supported cars:
Ford Focus 2004-2008

Siemens / Continental SID206

ECU Numbers:
5WS40584B-T | 8V21-12A650-EB (Ford Fiesta 1.4 TDCI 70HP 2010)

Supported cars:
Ford Fiesta 1.4 TDCI 70HP 2010-2012

Siemens SID202

ECU Numbers:
5WS40512A-T | 6M51-12A650-YA (Ford Focus 1.8 TDCI 115HP 2006)

Supported cars:
Ford Focus 1.8 TDCI 115HP 2004-2010

Volvo
 

1) New Program - VOLVO SCL 3
Use: SCL / ESL Signal Replacement

Supported cars:
S90, V90, XC60 II, XC90 II

Available in:
Julie PRO, Julie LITE, Julie VOLVO SCL 3

2) New Program - VOLVO SCL 2
Use: SCL / ESL Signal Replacement

Supported cars:
C30, S40 II, V50, C70 II

Available in:
Julie PRO, Julie VOLVO SCL 2

Purchase Julie PRO and be ready for any car that arrives in your workshop!

• Julie™ PRO 

We're making Julie better for you!
Let's recap all the new solutions that were added to Julie in recent months:

Version 118

BMW

1) New Program - BMW 5
Use: BMW F-Series (CAN) and E-Series* (CAN) cars
*Except BMW X3 (E83)

Engine + EGS Swap (8HP Automatic Transmission Gearbox)
Engine-only Swap
EGS-only Swap

Example models:
F20, F30, F48, E70, E71, E90

Additionally, the original car (donor) must meet the following requirements:

It has to be equipped with one of the following modules: EWS4 / CAS / FEM
- The ISN in the ECU content needs to have 16 bytes
- The ISN in the EGS content needs to have 16 bytes (optional - if your project requires it)
Attention:
The procedure WILL NOT WORK if the recipient car is equipped with EWS4 / CAS / FEM module.

Available in:
Julie PRO, Julie LITE, Julie BMW

2) New Program - BMW 4
This program is dedicated to BMW E-Series (CAS-BUS) cars and can be used for the following purposes:

Replacing a damaged ECU

Available in:
Julie PRO

Version 117

Renault / Dacia / Nissan

1) New Program - Renault ISK Password
Function: Use Julie to read ECU values required to calculate ISK Password.
You can combine this procedure with our service - Renault ISK Code Calculating - to get ISK code for your ECU!

Supported ECUs:
Bosch MD1CS006, EDC17C84
Continental EMS3161, EMS3160, EMS3155, EMS3150, EMS3141, EMS3140, EMS3125, EMS3120, SID321, SID310, SID309, SID307

Available in:
Julie PRO, Julie LITE, Julie RENAULT NISSAN

Mercedes

1) ESL/ELV Replacement - New models added!

Supported models:
W176, W204, C207, W212, W246 - Available in Julie PRO
W169, W245 - Available in Julie PRO, Clixe MERCEDES | ESL/ELV

Version 116

PSA Group

1) New Program - PSA Automatic
Use: Fully automatic procedure that can be used in the following ways:
- Determine ECU PIN - for coding the keys or matching the ECU to the car.
- IMMO OFF with Emulator

The procedure must be completed by connecting the ECU on the bench. You just need to connect the Emulator to the ECU according to the pinouts found in the instruction manual.
The Emulator will automatically determine the ECU's PIN CODE or replace immobiliser signal.

The procedure may take 3 to 90 hours. Procedure completion will be indicated by a blue LED on the Emulator.

Supported ECUs:
Bosch EDC17C60, MD1, MD1CS003, MG1CS032, MG1CS042
Continental VD56.1
Delphi DCM7.1A
Valeo VD56.12

Available in:
Julie PRO, Julie LITE, Julie PSA

Version 115

VAG Group

1) WFS5 / MQB Platform - Universal Solution for Bentley / Bugatti / Lamborghini / Porsche
ECU + TCU authorisation

2) New supported ECU - Bosch ME17.1.6 (Bentley)

Available in:
Julie PRO, Julie LITE, Julie VAG

TACHO and AIRBAG solutions

1) Version 115 is the last Julie version with TACHO and AIRBAG solutions. They will no longer be supported.
 

 Version 114

VAG Group

1) WFS5 / MQB Platform - Universal Solution for Audi / Seat / Skoda / Volkswagen
ECU + TCU authorisation

Supported ECUs:
Bosch EDC17CP44
Bosch EDC17CP20
Bosch ME17.5.24
Bosch MED 17.1
Continental SIMOS 18.1

Supported TCUs:
DQ200
DQ250
VL300
VL381
DL382
DL501

Available in:
Julie PRO, Julie LITE, Julie VAG